Module org.hsqldb

Class JDBCConnection

  • All Implemented Interfaces:
    java.lang.AutoCloseable, java.sql.Connection, java.sql.Wrapper
    Direct Known Subclasses:
    JDBCXAConnectionWrapper

    public class JDBCConnection
    extends java.lang.Object
    implements java.sql.Connection
    A connection (session) with a specific database. SQL statements are executed and results are returned within the context of a connection.

    A Connection object's database is able to provide information describing its tables, its supported SQL grammar, its stored procedures, the capabilities of this connection, and so on. This information is obtained with the getMetaData method.

    (JDBC4 clarification:)

    Note: When configuring a Connection, JDBC applications should use the appropriate Connection method such as setAutoCommit or setTransactionIsolation. Applications should not invoke SQL commands directly to change the connection's configuration when there is a JDBC method available. By default, a Connection object is in auto-commit mode, which means that it automatically commits changes after executing each statement. If auto-commit mode has been disabled, the method commit must be called explicitly in order to commit changes; otherwise, database changes will not be saved.

    A new Connection object created using the JDBC 2.1 core API has an initially empty type map associated with it. A user may enter a custom mapping for a UDT in this type map. When a UDT is retrieved from a data source with the method ResultSet.getObject, the getObject method will check the connection's type map to see if there is an entry for that UDT. If so, the getObject method will map the UDT to the class indicated. If there is no entry, the UDT will be mapped using the standard mapping.

    A user may create a new type map, which is a java.util.Map object, make an entry in it, and pass it to the java.sql methods that can perform custom mapping. In this case, the method will use the given type map instead of the one associated with the connection.

    For example, the following code fragment specifies that the SQL type ATHLETES will be mapped to the class Athletes in the Java programming language. The code fragment retrieves the type map for the Connection object con, inserts the entry into it, and then sets the type map with the new entry as the connection's type map.

          java.util.Map map = con.getTypeMap();
          map.put("mySchemaName.ATHLETES", Class.forName("Athletes"));
          con.setTypeMap(map);
     

    HSQLDB-Specific Information:

    To get a Connection to an HSQLDB database, the following code may be used (updated to reflect the most recent recommendations):


    When using HSQLDB, the database connection <url> must start with 'jdbc:hsqldb:'

    Since 1.7.2, connection properties (<key-value-pairs>) may be appended to the database connection <url>, using the form:

    '<url>[;key=value]*'

    Also since 1.7.2, the allowable forms of the HSQLDB database connection <url> have been extended. However, all legacy forms continue to work, with unchanged semantics. The extensions are as described in the following material.


    Network Server Database Connections:

    The Server database connection <url> takes one of the two following forms:

    1. 'jdbc:hsqldb:hsql://host[:port][/<alias>][<key-value-pairs>]'
    2. 'jdbc:hsqldb:hsqls://host[:port][/<alias>][<key-value-pairs>]' (with TLS).

    The WebServer database connection <url> takes one of two following forms:

    1. 'jdbc:hsqldb:http://host[:port][/<alias>][<key-value-pairs>]'
    2. 'jdbc:hsqldb:https://host[:port][/<alias>][<key-value-pairs>]' (with TLS).

    In both network server database connection <url> forms, the optional <alias> component is used to identify one of possibly several database instances available at the indicated host and port. If the <alias> component is omitted, then a connection is made to the network server's default database instance, if such an instance is available.

    For more information on server configuration regarding mounting multiple databases and assigning them <alias> values, please read the Java API documentation for Server and related chapters in the general documentation, especially the HyperSQL User Guide.


    Transient, In-Process Database Connections:

    The 100% in-memory (transient, in-process) database connection <url> takes one of the two following forms:

    1. 'jdbc:hsqldb:.[<key-value-pairs>]' (the legacy form, extended)
    2. 'jdbc:hsqldb:mem:<alias>[<key-value-pairs>]' (the new form)

    The driver converts the supplied <alias> component to Local.ENGLISH lower case and uses the resulting character sequence as the key used to look up a mem: protocol database instance amongst the collection of all such instances already in existence within the current class loading context in the current JVM. If no such instance exists, one may be automatically created and mapped to the <alias>, as governed by the 'ifexists=true|false' connection property.

    The rationale for converting the supplied <alias> component to lower case is to provide consistency with the behavior of res: protocol database connection <url>s, explained further on in this overview.


    Persistent, In-Process Database Connections:

    The standalone (persistent, in-process) database connection <url> takes one of the three following forms:

    1. 'jdbc:hsqldb:<path>[<key-value-pairs>]' (the legacy form, extended)
    2. 'jdbc:hsqldb:file:<path>[<key-value-pairs>]' (same semantics as the legacy form)
    3. 'jdbc:hsqldb:res:<path>[<key-value-pairs>]' (new form with 'files_in_jar' semantics)

    For the persistent, in-process database connection <url>, the <path> component is the path prefix common to all of the files that compose the database.

    From 1.7.2, although other files may be involved (such as transient working files and/or TEXT table CSV data source files), the essential set that may, at any particular point in time, compose an HSQLDB database is:

    • <path>.properties
    • <path>.script
    • <path>.log
    • <path>.data
    • <path>.backup
    • <path>.lck

    For example: 'jdbc:hsqldb:file:test' connects to a database composed of some subset of the files listed above, where the expansion of <path> is 'test' prefixed with the canonical path of the JVM's effective working directory at the time the designated database is first opened in-process.

    Be careful to note that this canonical expansion of <path> is cached by the driver until JVM exit. So, although legacy JVMs tend to fix the reported effective working directory at the one noted upon JVM startup, there is no guarantee that modern JVMs will continue to uphold this behaviour. What this means is there is effectively no guarantee into the future that a relative file: protocol database connection <url> will connect to the same database instance for the life of the JVM. To avoid any future ambiguity issues, it is probably a best practice for clients to attempt to pre-canonicalize the <path> component of file: protocol database connection* <url>s.

    Under Windows, 'jdbc:hsqldb:file:c:\databases\test' connects to a database located on drive 'C:' in the directory 'databases', composed of some subset of the files:

     C:\
     +--databases\
        +--test.properties
        +--test.script
        +--test.log
        +--test.data
        +--test.backup
        +--test.lck
     
    Under most variations of UNIX, 'jdbc:hsqldb:file:/databases/test' connects to a database located in the directory 'databases' directly under root, once again composed of some subset of the files:
    
     +--databases
        +--test.properties
        +--test.script
        +--test.log
        +--test.data
        +--test.backup
        +--test.lck
     
    Some Guidelines:
    1. Both relative and absolute database file paths are supported.
    2. Relative database file paths can be specified in a platform independent manner as: '[dir1/dir2/.../dirn/]<file-name-prefix>'.
    3. Specification of absolute file paths is operating-system specific.
      Please read your OS file system documentation.
    4. Specification of network mounts may be operating-system specific.
      Please read your OS file system documentation.
    5. Special care may be needed w.r.t. file path specifications containing whitespace, mixed-case, special characters and/or reserved file names.
      Please read your OS file system documentation.

    Note:HSQLDB creates directories along the file path specified in the persistent, in-process mode database connection <url> form, in the case that they did not already exist.


    res: protocol Connections:

    The 'jdbc:hsqldb:res:<path>' database connection <url> has different semantics than the 'jdbc:hsqldb:file:<path>' form. The semantics are similar to those of a 'files_readonly' database, but with some additional points to consider.

    Specifically, the '<path>' component of a res: protocol database connection <url> is first converted to lower case with Locale.ENGLISH and only then used to obtain resource URL objects, which in turn are used to read the database files as resources on the class path.

    Due to lower case conversion by the driver, res: '<path>' components never find jar resources stored with Locale.ENGLISH mixed case paths. The rationale for converting to lower case is that not all pkzip implementations guarantee path case is preserved when archiving resources, and conversion to lower case seems to be the most common occurrence (although there is also no actual guarantee that the conversion is Locale.ENGLISH).

    More importantly, res: '<path>' components must point only to resources contained in one or more jars on the class path. That is, only resources having the jar sub-protocol are considered valid.

    This restriction is enforced to avoid the unfortunate situation in which, because res: database instances do not create a <path>.lck file (they are strictly files-read-only) and because the <path> components of res: and file: database URIs are not checked for file system equivalence, it is possible for the same database files to be accessed concurrently by both file: and res: database instances. That is, without this restriction, it is possible that <path>.data and <path>.properties file content may be written by a file: database instance without the knowledge or cooperation of a res: database instance open on the same files, potentially resulting in unexpected database errors, inconsistent operation and/or data corruption.

    In short, a res: type database connection <url> is designed specifically to connect to a 'files_in_jar' mode database instance, which in turn is designed specifically to operate under Java WebStart and Java Applet configurations, where co-locating the database files in the jars that make up the WebStart application or Applet avoids the need for special security configuration or code signing.

    Note: Since it is difficult and often nearly impossible to determine or control at runtime from where all classes are being loaded or which class loader is doing the loading (and hence how relative path specifications are resolved) under 'files_in_jar' semantics, the <path> component of the res: database connection <url> is always taken to be relative to the default package and resource URL resolution is always performed using the ClassLoader that loads the org.hsqldb.persist.Logger class. That is, if the <path> component does not start with '/', then'/' is prepended when obtaining the resource URLs used to read the database files, and only the effective class path of org.hsqldb.persist.Logger's ClassLoader is searched.


    For more information about HSQLDB file structure, various database modes and other attributes such as those controlled through the HSQLDB properties files, please read the general documentation, especially the HyperSQL User Guide.

    JDBC 4.0 Notes:

    Starting with JDBC 4.0 (JDK 1.6), the DriverManager methods getConnection and getDrivers have been enhanced to support the Java Standard Edition Service Provider mechanism. HSQLDB distribution jars containing the Driver implementation also include the file META-INF/services/java.sql.Driver. This file contains the fully qualified class name ('org.hsqldb.jdbc.JDBCDriver') of the HSQLDB implementation of java.sql.Driver.

    Hence, under JDBC 4.0 or greater, applications no longer need to explicitly load the HSQLDB JDBC driver using Class.forName(). Of course, existing programs which do load JDBC drivers using Class.forName() will continue to work without modification.


    (fredt@users)
    (campbell-burnet@users)

    Since:
    HSQLDB 1.9.0
    Author:
    Campbell Burnet (campbell-burnet@users dot sourceforge.net), Fred Toussi (fredt@users dot sourceforge.net)
    See Also:
    JDBCDriver, JDBCStatement, JDBCParameterMetaData, JDBCCallableStatement, JDBCResultSet, JDBCDatabaseMetaData, DriverManager, Statement, ResultSet, DatabaseMetaData
    • Field Summary

      • Fields inherited from interface java.sql.Connection

        TRANSACTION_NONE, TRANSACTION_READ_COMMITTED, TRANSACTION_READ_UNCOMMITTED, TRANSACTION_REPEATABLE_READ, TRANSACTION_SERIALIZABLE
    • Constructor Summary

      Constructors 
      Constructor Description
      JDBCConnection​(JDBCConnection c, JDBCConnectionEventListener eventListener)
      Constructor for use with connection pooling and XA.
      JDBCConnection​(org.hsqldb.persist.HsqlProperties props)
      Constructs a new external Connection to an HSQLDB Database.
      JDBCConnection​(org.hsqldb.SessionInterface c)
      Constructs an INTERNAL Connection, using the specified SessionInterface.
    • Method Summary

      All Methods Instance Methods Concrete Methods 
      Modifier and Type Method Description
      void abort​(java.util.concurrent.Executor executor)
      Terminates an open connection.
      void clearWarnings()
      Clears all warnings reported for this Connection object.
      void close()
      Releases this Connection object's database and JDBC resources immediately instead of waiting for them to be automatically released.
      void closeFully()
      Completely closes a pooled connection
      void commit()
      Makes all changes made since the previous commit/rollback permanent and releases any database locks currently held by this Connection object.
      java.sql.Array createArrayOf​(java.lang.String typeName, java.lang.Object[] elements)
      Factory method for creating Array objects.
      java.sql.Blob createBlob()
      Constructs an object that implements the Blob interface.
      java.sql.Clob createClob()
      Constructs an object that implements the Clob interface.
      java.sql.NClob createNClob()
      Constructs an object that implements the NClob interface.
      java.sql.SQLXML createSQLXML()
      Constructs an object that implements the SQLXML interface.
      java.sql.Statement createStatement()
      Creates a Statement object for sending SQL statements to the database.
      java.sql.Statement createStatement​(int resultSetType, int resultSetConcurrency)
      Creates a Statement object that will generate ResultSet objects with the given type and concurrency.
      java.sql.Statement createStatement​(int resultSetType, int resultSetConcurrency, int resultSetHoldability)
      Creates a Statement object that will generate ResultSet objects with the given type, concurrency, and holdability.
      java.sql.Struct createStruct​(java.lang.String typeName, java.lang.Object[] attributes)
      Factory method for creating Struct objects.
      boolean getAutoCommit()
      Retrieves the current auto-commit mode for this Connection object.
      java.lang.String getCatalog()
      Retrieves this Connection object's current catalog name.
      java.util.Properties getClientInfo()
      Returns a list containing the name and current value of each client info property supported by the driver.
      java.lang.String getClientInfo​(java.lang.String name)
      Returns the value of the client info property specified by name.
      org.hsqldb.persist.HsqlProperties getConnProperties()  
      int getHoldability()
      Retrieves the current holdability of ResultSet objects created using this Connection object.
      java.sql.DatabaseMetaData getMetaData()
      Retrieves a DatabaseMetaData object that contains metadata about the database to which this Connection object represents a connection.
      int getNetworkTimeout()
      Retrieves the number of milliseconds the driver will wait for a database request to complete.
      java.lang.String getSchema()
      Retrieves this Connection object's current schema name.
      org.hsqldb.SessionInterface getSession()
      provides cross-package access to the proprietary (i.e.
      int getTransactionIsolation()
      Retrieves this Connection object's current transaction isolation level.
      java.util.Map<java.lang.String,​java.lang.Class<?>> getTypeMap()
      Retrieves the Map object associated with this Connection object.
      java.lang.String getURL()
      Retrieves this connection's JDBC url.
      java.sql.SQLWarning getWarnings()
      Retrieves the first warning reported by calls on this Connection object.
      boolean isClosed()
      Retrieves whether this Connection object has been closed.
      boolean isInternal()  
      boolean isNetwork()  
      boolean isReadOnly()
      Retrieves whether this Connection object is in read-only mode.
      boolean isValid​(int timeout)
      Returns true if the connection has not been closed and is still valid.
      boolean isWrapperFor​(java.lang.Class<?> iface)
      Returns true if this either implements the interface argument or is directly or indirectly a wrapper for an object that does.
      java.lang.String nativeSQL​(java.lang.String sql)
      Converts the given SQL statement into the system's native SQL grammar.
      java.sql.CallableStatement prepareCall​(java.lang.String sql)
      Creates a CallableStatement object for calling database stored procedures.
      java.sql.CallableStatement prepareCall​(java.lang.String sql, int resultSetType, int resultSetConcurrency)
      Creates a CallableStatement object that will generate ResultSet objects with the given type and concurrency.
      java.sql.CallableStatement prepareCall​(java.lang.String sql, int resultSetType, int resultSetConcurrency, int resultSetHoldability)
      Creates a CallableStatement object that will generate ResultSet objects with the given type and concurrency.
      java.sql.PreparedStatement prepareStatement​(java.lang.String sql)
      Creates a PreparedStatement object for sending parameterized SQL statements to the database.
      java.sql.PreparedStatement prepareStatement​(java.lang.String sql, int autoGeneratedKeys)
      Creates a default PreparedStatement object that has the capability to retrieve auto-generated keys.
      java.sql.PreparedStatement prepareStatement​(java.lang.String sql, int[] columnIndexes)
      Creates a default PreparedStatement object capable of returning the auto-generated keys designated by the given array.
      java.sql.PreparedStatement prepareStatement​(java.lang.String sql, int resultSetType, int resultSetConcurrency)
      Creates a PreparedStatement object that will generate ResultSet objects with the given type and concurrency.
      java.sql.PreparedStatement prepareStatement​(java.lang.String sql, int resultSetType, int resultSetConcurrency, int resultSetHoldability)
      Creates a PreparedStatement object that will generate ResultSet objects with the given type, concurrency, and holdability.
      java.sql.PreparedStatement prepareStatement​(java.lang.String sql, java.lang.String[] columnNames)
      Creates a default PreparedStatement object capable of returning the auto-generated keys designated by the given array.
      void releaseSavepoint​(java.sql.Savepoint savepoint)
      Removes the specified Savepoint (JDBC4 Clarification:) and subsequent Savepoint objects from the current transaction.
      void reset()
      Resets this connection so it can be used again.
      void rollback()
      Undoes all changes made in the current transaction and releases any database locks currently held by this Connection object.
      void rollback​(java.sql.Savepoint savepoint)
      Undoes all changes made after the given Savepoint object was set.
      void setAutoCommit​(boolean autoCommit)
      Sets this connection's auto-commit mode to the given state.
      void setCatalog​(java.lang.String catalog)
      Sets the given catalog name in order to select a subspace of this Connection object's database in which to work.
      void setClientInfo​(java.lang.String name, java.lang.String value)
      Sets the value of the client info property specified by name to the value specified by value.
      void setClientInfo​(java.util.Properties properties)
      Sets the value of the connection's client info properties.
      void setHoldability​(int holdability)
      (JDBC4 Clarification:) Changes the default holdability of ResultSet objects created using this Connection object to the given holdability.
      void setNetworkTimeout​(java.util.concurrent.Executor executor, int milliseconds)
      Sets the maximum period a Connection or objects created from the Connection will wait for the database to reply to any one request.
      void setReadOnly​(boolean readOnly)
      Puts this connection in read-only mode as a hint to the driver to enable database optimizations.
      java.sql.Savepoint setSavepoint()
      Creates an unnamed savepoint in the current transaction and returns the new Savepoint object that represents it.
      java.sql.Savepoint setSavepoint​(java.lang.String name)
      Creates a savepoint with the given name in the current transaction and returns the new Savepoint object that represents it.
      void setSchema​(java.lang.String schema)
      Sets the given schema name to access.
      void setTransactionIsolation​(int level)
      Attempts to change the transaction isolation level for this Connection object to the one given.
      void setTypeMap​(java.util.Map<java.lang.String,​java.lang.Class<?>> map)
      Installs the given TypeMap object as the type map for this Connection object.
      <T> T unwrap​(java.lang.Class<T> iface)
      Returns an object that implements the given interface to allow access to non-standard methods, or standard methods not exposed by the proxy.
      • Methods inherited from class java.lang.Object

        equals, getClass, hashCode, notify, notifyAll, toString, wait, wait, wait
      • Methods inherited from interface java.sql.Connection

        beginRequest, endRequest, setShardingKey, setShardingKey, setShardingKeyIfValid, setShardingKeyIfValid
    • Constructor Detail

      • JDBCConnection

        public JDBCConnection​(org.hsqldb.persist.HsqlProperties props)
                       throws java.sql.SQLException
        Constructs a new external Connection to an HSQLDB Database.

        This constructor is called on behalf of the java.sql.DriverManager when getting a Connection for use in normal (external) client code.

        Internal client code, that being code located in HSQLDB SQL functions and stored procedures, receives an INTERNAL connection constructed by the JDBCConnection(SessionInterface) constructor.

        Parameters:
        props - A Properties object containing the connection properties
        Throws:
        java.sql.SQLException - when the user/password combination is invalid, the connection url is invalid, or the Database is unavailable.

        The Database may be unavailable for a number of reasons, including network problems or the fact that it may already be in use by another process.

      • JDBCConnection

        public JDBCConnection​(org.hsqldb.SessionInterface c)
        Constructs an INTERNAL Connection, using the specified SessionInterface.

        This constructor is called only on behalf of an existing Session (the internal parallel of a Connection), to be used as a parameter to a SQL function or stored procedure that needs to execute in the context of that Session.

        When a Java SQL function or stored procedure is called and its first parameter is of type Connection, HSQLDB automatically notices this and constructs an INTERNAL Connection using the current Session. HSQLDB then passes this Connection in the first parameter position, moving any other parameter values specified in the SQL statement to the right by one position.

        To read more about this, see Routine.

        Notes:

        Starting with HSQLDB 1.7.2, INTERNAL connections are not closed by a call to close() or by a SQL DISCONNECT. For HSQLDB developers not involved with writing database internals, this change only applies to connections obtained automatically from the database as the first parameter to Java stored procedures and functions. This is mainly an issue to developers writing custom SQL function and stored procedure libraries for HSQLDB. Presently, it is recommended that SQL function and stored procedure code avoid depending on closing or issuing a DISCONNECT on a connection obtained in this manner.

        Parameters:
        c - the Session requesting the construction of this Connection
        Throws:
        org.hsqldb.HsqlException - never (reserved for future use);
        See Also:
        Routine
      • JDBCConnection

        public JDBCConnection​(JDBCConnection c,
                              JDBCConnectionEventListener eventListener)
        Constructor for use with connection pooling and XA.
        Parameters:
        c - the connection
        eventListener - the listener
    • Method Detail

      • createStatement

        public java.sql.Statement createStatement()
                                           throws java.sql.SQLException
        Creates a Statement object for sending SQL statements to the database. SQL statements without parameters are normally executed using Statement objects. If the same SQL statement is executed many times, it may be more efficient to use a PreparedStatement object.

        Result sets created using the returned Statement object will by default be type TYPE_FORWARD_ONLY and have a concurrency level of CONCUR_READ_ONLY. The holdability of the created result sets can be determined by calling getHoldability().

        HSQLDB-Specific Information:

        Starting with HSQLDB 1.7.2, support for precompilation at the engine level has been implemented, so it is now much more efficient and performant to use a PreparedStatement object if the same short-running SQL statement is to be executed many times.

        HSQLDB supports TYPE_FORWARD_ONLY, TYPE_SCROLL_INSENSITIVE and CONCUR_READ_ONLY results.

        Specified by:
        createStatement in interface java.sql.Connection
        Returns:
        a new default Statement object
        Throws:
        java.sql.SQLException - if a database access error occurs (JDBC4 clarification:) or this method is called on a closed connection
        See Also:
        createStatement(int,int), createStatement(int,int,int)
      • prepareStatement

        public java.sql.PreparedStatement prepareStatement​(java.lang.String sql)
                                                    throws java.sql.SQLException
        Creates a PreparedStatement object for sending parameterized SQL statements to the database.

        A SQL statement with or without IN parameters can be pre-compiled and stored in a PreparedStatement object. This object can then be used to efficiently execute this statement multiple times.

        Note: This method is optimized for handling parametric SQL statements that benefit from precompilation. If the driver supports precompilation, the method prepareStatement will send the statement to the database for precompilation. Some drivers may not support precompilation. In this case, the statement may not be sent to the database until the PreparedStatement object is executed. This has no direct effect on users; however, it does affect which methods throw certain SQLException objects.

        Result sets created using the returned PreparedStatement object will by default be type TYPE_FORWARD_ONLY and have a concurrency level of CONCUR_READ_ONLY. The holdability of the created result sets can be determined by calling getHoldability().

        HSQLDB-Specific Information:

        Starting with HSQLDB 1.7.2, support for precompilation at the engine level has been implemented, so it is now much more efficient and performant to use a PreparedStatement object if the same short-running SQL statement is to be executed many times.

        The support for and behaviour of PreparedStatement complies with SQL and JDBC standards. Please read the introductory section of the documentation for ${link JDBCParameterMetaData}.

        Specified by:
        prepareStatement in interface java.sql.Connection
        Parameters:
        sql - an SQL statement that may contain one or more '?' IN parameter placeholders
        Returns:
        a new default PreparedStatement object containing the pre-compiled SQL statement
        Throws:
        java.sql.SQLException - if a database access error occurs (JDBC4 clarification:) or this method is called on a closed connection
        See Also:
        prepareStatement(String,int,int)
      • prepareCall

        public java.sql.CallableStatement prepareCall​(java.lang.String sql)
                                               throws java.sql.SQLException
        Creates a CallableStatement object for calling database stored procedures. The CallableStatement object provides methods for setting up its IN and OUT parameters, and methods for executing the call to a stored procedure.

        Note: This method is optimized for handling stored procedure call statements. Some drivers may send the call statement to the database when the method prepareCall is done; others may wait until the CallableStatement object is executed. This has no direct effect on users; however, it does affect which method throws certain SQLExceptions.

        Result sets created using the returned CallableStatement object will by default be type TYPE_FORWARD_ONLY and have a concurrency level of CONCUR_READ_ONLY. The holdability of the created result sets can be determined by calling getHoldability().

        HSQLDB-Specific Information:

        Starting with 1.7.2, the support for and behaviour of CallableStatement has changed. Please read the introductory section of the documentation for org.hsqldb.jdbc.JDBCCallableStatement.

        Specified by:
        prepareCall in interface java.sql.Connection
        Parameters:
        sql - an SQL statement that may contain one or more '?' parameter placeholders. (JDBC4 clarification:) Typically this statement is specified using JDBC call escape syntax.
        Returns:
        a new default CallableStatement object containing the pre-compiled SQL statement
        Throws:
        java.sql.SQLException - if a database access error occurs (JDBC4 clarification:) or this method is called on a closed connection
        See Also:
        prepareCall(String,int,int)
      • nativeSQL

        public java.lang.String nativeSQL​(java.lang.String sql)
                                   throws java.sql.SQLException
        Converts the given SQL statement into the system's native SQL grammar. A driver may convert the JDBC SQL grammar into its system's native SQL grammar prior to sending it. This method returns the native form of the statement that the driver would have sent.

        HSQLDB-Specific Information:

        HSQLDB converts the JDBC SQL grammar into the system's native SQL grammar prior to sending it, if escape processing is set true; this method returns the native form of the statement that the driver would send in place of client-specified JDBC SQL grammar.

        Before 1.7.2, escape processing was incomplete and also broken in terms of support for nested escapes.

        Starting with 1.7.2, escape processing is complete and handles nesting to arbitrary depth, but enforces a very strict interpretation of the syntax and does not detect or process SQL comments.

        In essence, the HSQLDB engine directly handles the prescribed syntax and date / time formats specified internal to the JDBC escapes. It also directly offers the XOpen / ODBC extended scalar functions specified available internal to the {fn ...} JDBC escape. As such, the driver simply removes the curly braces and JDBC escape codes in the simplest and fastest fashion possible, by replacing them with whitespace. But to avoid a great deal of complexity, certain forms of input whitespace are currently not recognised. For instance, the driver handles "{?= call ...}" but not "{ ?= call ...} or "{? = call ...}"

        Also, comments embedded in SQL are currently not detected or processed and thus may have unexpected effects on the output of this method, for instance causing otherwise valid SQL to become invalid. It is especially important to be aware of this because escape processing is set true by default for Statement objects and is always set true when producing a PreparedStatement from prepareStatement() or CallableStatement from prepareCall(). Currently, it is simply recommended to avoid submitting SQL having comments containing JDBC escape sequence patterns and/or single or double quotation marks, as this will avoid any potential problems. It is intended to implement a less strict handling of whitespace and proper processing of SQL comments at some point in the near future. In any event, 1.7.2 now correctly processes the following JDBC escape forms to arbitrary nesting depth, but only if the exact whitespace layout described below is used:

        1. {call ...}
        2. {?= call ...}
        3. {fn ...}
        4. {oj ...}
        5. {d ...}
        6. {t ...}
        7. {ts ...}

        Specified by:
        nativeSQL in interface java.sql.Connection
        Parameters:
        sql - an SQL statement that may contain one or more '?' parameter placeholders
        Returns:
        the native form of this statement
        Throws:
        java.sql.SQLException - if a database access error occurs (JDBC4 clarification:) or this method is called on a closed connection
      • setAutoCommit

        public void setAutoCommit​(boolean autoCommit)
                           throws java.sql.SQLException
        Sets this connection's auto-commit mode to the given state. If a connection is in auto-commit mode, then all its SQL statements will be executed and committed as individual transactions. Otherwise, its SQL statements are grouped into transactions that are terminated by a call to either the method commit or the method rollback. By default, new connections are in auto-commit mode.

        The commit occurs when the statement completes. The time when the statement completes depends on the type of SQL Statement:

        • For DML statements, such as Insert, Update or Delete, and DDL statements, the statement is complete as soon as it has finished executing.
        • For Select statements, the statement is complete when the associated result set is closed.
        • For CallableStatement objects or for statements that return multiple results, the statement is complete when all of the associated result sets have been closed, and all update counts and output parameters have been retrieved.

        NOTE: If this method is called during a transaction and the auto-commit mode is changed, the transaction is committed. If setAutoCommit is called and the auto-commit mode is not changed, the call is a no-op.

        HSQLDB-Specific Information:

        Up to and including HSQLDB 2.0,

        1. All rows of a result set are retrieved internally before the first row can actually be fetched.
          Therefore, a statement can be considered complete as soon as any XXXStatement.executeXXX method returns.

        Starting with 2.0, HSQLDB may not return a result set to the network client as a whole; the generic documentation will apply. The fetch size is taken into account (campbell-burnet@users)

        Specified by:
        setAutoCommit in interface java.sql.Connection
        Parameters:
        autoCommit - true to enable auto-commit mode; false to disable it
        Throws:
        java.sql.SQLException - if a database access error occurs, (JDBC4 Clarification:) setAutoCommit(true) is called while participating in a distributed transaction, or this method is called on a closed connection
        See Also:
        getAutoCommit()
      • getAutoCommit

        public boolean getAutoCommit()
                              throws java.sql.SQLException
        Retrieves the current auto-commit mode for this Connection object.
        Specified by:
        getAutoCommit in interface java.sql.Connection
        Returns:
        the current state of this Connection object's auto-commit mode
        Throws:
        java.sql.SQLException - if a database access error occurs (JDBC4 Clarification:) or this method is called on a closed connection
        See Also:
        setAutoCommit(boolean)
      • commit

        public void commit()
                    throws java.sql.SQLException
        Makes all changes made since the previous commit/rollback permanent and releases any database locks currently held by this Connection object. This method should be used only when auto-commit mode has been disabled.

        HSQLDB-Specific Information:

        Specified by:
        commit in interface java.sql.Connection
        Throws:
        java.sql.SQLException - if a database access error occurs, (JDBC4 Clarification:) this method is called while participating in a distributed transaction, if this method is called on a closed connection or this Connection object is in auto-commit mode
        See Also:
        setAutoCommit(boolean)
      • rollback

        public void rollback()
                      throws java.sql.SQLException
        Undoes all changes made in the current transaction and releases any database locks currently held by this Connection object. This method should be used only when auto-commit mode has been disabled.

        HSQLDB-Specific Information:

        Starting with HSQLDB 1.7.2, savepoints are fully supported both in SQL and via the JDBC interface.

        Using SQL, savepoints may be set, released and used in rollback as follows:

         SAVEPOINT <savepoint-name>
         RELEASE SAVEPOINT <savepoint-name>
         ROLLBACK TO SAVEPOINT <savepoint-name>
         
        Specified by:
        rollback in interface java.sql.Connection
        Throws:
        java.sql.SQLException - if a database access error occurs, (JDBC4 Clarification:) this method is called while participating in a distributed transaction, this method is called on a closed connection or this Connection object is in auto-commit mode
        See Also:
        setAutoCommit(boolean)
      • close

        public void close()
                   throws java.sql.SQLException
        Releases this Connection object's database and JDBC resources immediately instead of waiting for them to be automatically released.

        Calling the method close on a Connection object that is already closed is a no-op.

        It is strongly recommended that an application explicitly commits or rolls back an active transaction prior to calling the close method. If the close method is called and there is an active transaction, the results are implementation-defined.

        HSQLDB-Specific Information:

        From 1.7.2, HSQLDB INTERNAL Connection objects are not closable from JDBC client code.

        Specified by:
        close in interface java.lang.AutoCloseable
        Specified by:
        close in interface java.sql.Connection
        Throws:
        java.sql.SQLException - if a database access error occurs
      • isClosed

        public boolean isClosed()
                         throws java.sql.SQLException
        Retrieves whether this Connection object has been closed. A connection is closed if the method close has been called on it or if certain fatal errors have occurred. This method is guaranteed to return true only when it is called after the method Connection.close has been called.

        This method generally cannot be called to determine whether a connection to a database is valid or invalid. A typical client can determine that a connection is invalid by catching any exceptions that might be thrown when an operation is attempted.

        Specified by:
        isClosed in interface java.sql.Connection
        Returns:
        true if this Connection object is closed; false if it is still open
        Throws:
        java.sql.SQLException - if a database access error occurs
      • getMetaData

        public java.sql.DatabaseMetaData getMetaData()
                                              throws java.sql.SQLException
        Retrieves a DatabaseMetaData object that contains metadata about the database to which this Connection object represents a connection. The metadata includes information about the database's tables, its supported SQL grammar, its stored procedures, the capabilities of this connection, and so on.

        HSQLDB-Specific Information:

        HSQLDB 2.0 essentially supports full database metadata.

        For discussion in greater detail, please follow the link to the overview for JDBCDatabaseMetaData, below.

        Specified by:
        getMetaData in interface java.sql.Connection
        Returns:
        a DatabaseMetaData object for this Connection object
        Throws:
        java.sql.SQLException - if a database access error occurs (JDBC4 Clarification) or this method is called on a closed connection
        See Also:
        JDBCDatabaseMetaData
      • setReadOnly

        public void setReadOnly​(boolean readOnly)
                         throws java.sql.SQLException
        Puts this connection in read-only mode as a hint to the driver to enable database optimizations.

        Note: This method cannot be called during a transaction.

        HSQLDB-Specific Information:

        HSQLDB 2.0 supports the SQL standard, which will not allow calls to this method to succeed during a transaction.

        Additionally, HSQLDB provides a way to put a whole database in read-only mode. This is done by manually adding the line 'readonly=true' to the database's .properties file while the database is offline. Upon restart, all connections will be readonly, since the entire database will be readonly. To take a database out of readonly mode, simply take the database offline and remove the line 'readonly=true' from the database's .properties file. Upon restart, the database will be in regular (read-write) mode.

        When a database is put in readonly mode, its files are opened in readonly mode, making it possible to create CD-based readonly databases. To create a CD-based readonly database that has CACHED tables and whose .data file is suspected of being highly fragmented, it is recommended that the database first be SHUTDOWN COMPACTed before copying the database files to CD. This will reduce the space required and may improve access times against the .data file which holds the CACHED table data.

        Starting with 1.7.2, an alternate approach to opimizing the .data file before creating a CD-based readonly database is to issue the CHECKPOINT DEFRAG command followed by SHUTDOWN to take the database offline in preparation to burn the database files to CD.

        Specified by:
        setReadOnly in interface java.sql.Connection
        Parameters:
        readOnly - true enables read-only mode; false disables it
        Throws:
        java.sql.SQLException - if a database access error occurs, this (JDBC4 Clarification:) method is called on a closed connection or this method is called during a transaction
      • isReadOnly

        public boolean isReadOnly()
                           throws java.sql.SQLException
        Retrieves whether this Connection object is in read-only mode.
        Specified by:
        isReadOnly in interface java.sql.Connection
        Returns:
        true if this Connection object is read-only; false otherwise
        Throws:
        java.sql.SQLException - if a database access error occurs (JDBC4 Clarification:) or this method is called on a closed connection
      • setCatalog

        public void setCatalog​(java.lang.String catalog)
                        throws java.sql.SQLException
        Sets the given catalog name in order to select a subspace of this Connection object's database in which to work.

        (JDBC4 Clarification:)

        If the driver does not support catalogs, it will silently ignore this request. JDBC 4.1[

        Calling setCatalog has no effect on previously created or prepared Statement objects. It is implementation defined whether a DBMS prepare operation takes place immediately when the Connection method prepareStatement or prepareCall is invoked. For maximum portability, setCatalog should be called before a Statement is created or prepared.]

        HSQLDB-Specific Information:

        HSQLDB supports a single catalog per database. If the given catalog name is not the same as the database catalog name, this method throws an error.

        Specified by:
        setCatalog in interface java.sql.Connection
        Parameters:
        catalog - the name of a catalog (subspace in this Connection object's database) in which to work
        Throws:
        java.sql.SQLException - if a database access error occurs (JDBC4 Clarification) or this method is called on a closed connection
        See Also:
        getCatalog()
      • getCatalog

        public java.lang.String getCatalog()
                                    throws java.sql.SQLException
        Retrieves this Connection object's current catalog name.

        HSQLDB-Specific Information:

        HSQLDB supports a single catalog per database. This method returns the catalog name for the current database error.

        Specified by:
        getCatalog in interface java.sql.Connection
        Returns:
        the current catalog name or null if there is none
        Throws:
        java.sql.SQLException - if a database access error occurs (JDBC4 Clarification:) or this method is called on a closed connection
        See Also:
        setCatalog(java.lang.String)
      • setTransactionIsolation

        public void setTransactionIsolation​(int level)
                                     throws java.sql.SQLException
        Attempts to change the transaction isolation level for this Connection object to the one given. The constants defined in the interface Connection are the possible transaction isolation levels.

        Note: If this method is called during a transaction, the result is implementation-defined.

        HSQLDB-Specific Information:

        HSQLDB 2.0 accepts all isolation levels. Connection.TRANSACTION_READ_UNCOMMITED is promoted to Connection.TRANSACTION_READ_COMMITED, but the transactions become read only. Calling this method during a transaction always succeeds and the selected isolation level is used from the next transaction.

        Specified by:
        setTransactionIsolation in interface java.sql.Connection
        Parameters:
        level - one of the following Connection constants: Connection.TRANSACTION_READ_UNCOMMITTED, Connection.TRANSACTION_READ_COMMITTED, Connection.TRANSACTION_REPEATABLE_READ, or Connection.TRANSACTION_SERIALIZABLE. (Note that Connection.TRANSACTION_NONE cannot be used because it specifies that transactions are not supported.)
        Throws:
        java.sql.SQLException - if a database access error occurs, this (JDBC4 Clarification:) method is called on a closed connection (:JDBC4 End Clarification) or the given parameter is not one of the Connection constants
        See Also:
        JDBCDatabaseMetaData.supportsTransactionIsolationLevel(int), getTransactionIsolation()
      • getTransactionIsolation

        public int getTransactionIsolation()
                                    throws java.sql.SQLException
        Retrieves this Connection object's current transaction isolation level.

        HSQLDB-Specific Information:

        HSQLDB 2.0 supports all isolation levels. Connection.TRANSACTION_READ_UNCOMMITED is promoted to Connection.TRANSACTION_READ_COMMITED.

        Specified by:
        getTransactionIsolation in interface java.sql.Connection
        Returns:
        the current transaction isolation level, which will be one of the following constants: Connection.TRANSACTION_READ_UNCOMMITTED, Connection.TRANSACTION_READ_COMMITTED, Connection.TRANSACTION_REPEATABLE_READ, Connection.TRANSACTION_SERIALIZABLE, or Connection.TRANSACTION_NONE.
        Throws:
        java.sql.SQLException - if a database access error occurs (JDBC4 Clarification:) or this method is called on a closed connection
        See Also:
        JDBCDatabaseMetaData.supportsTransactionIsolationLevel(int), setTransactionIsolation(int)
      • getWarnings

        public java.sql.SQLWarning getWarnings()
                                        throws java.sql.SQLException
        Retrieves the first warning reported by calls on this Connection object. If there is more than one warning, subsequent warnings will be chained to the first one and can be retrieved by calling the method SQLWarning.getNextWarning on the warning that was retrieved previously.

        This method may not be called on a closed connection; doing so will cause an SQLException to be thrown.

        Note: Subsequent warnings will be chained to this SQLWarning.

        HSQLDB-Specific Information:

        HSQLDB produces warnings whenever a createStatement(), prepareStatement() or prepareCall() invocation requests an unsupported but defined combination of result set type, concurrency and holdability, such that another set is substituted.

        Other warnings are typically raised during the execution of data change and query statements.

        Only the warnings caused by the last operation on this connection are returned by this method. A single operation may return up to 10 chained warnings.

        Specified by:
        getWarnings in interface java.sql.Connection
        Returns:
        the first SQLWarning object or null if there are none
        Throws:
        java.sql.SQLException - if a database access error occurs or this method is called on a closed connection
        See Also:
        SQLWarning
      • clearWarnings

        public void clearWarnings()
                           throws java.sql.SQLException
        Clears all warnings reported for this Connection object. After a call to this method, the method getWarnings returns null until a new warning is reported for this Connection object.

        HSQLDB-Specific Information:

        The standard behaviour is implemented.

        Specified by:
        clearWarnings in interface java.sql.Connection
        Throws:
        java.sql.SQLException - if a database access error occurs (JDBC4 Clarification:) or this method is called on a closed connection
      • createStatement

        public java.sql.Statement createStatement​(int resultSetType,
                                                  int resultSetConcurrency)
                                           throws java.sql.SQLException
        Creates a Statement object that will generate ResultSet objects with the given type and concurrency. This method is the same as the createStatement method above, but it allows the default result set type and concurrency to be overridden. The holdability of the created result sets can be determined by calling getHoldability().

        HSQLDB-Specific Information:

        HSQLDB 2.0 adheres closely to SQL and JDBC standards. The interpretation of of resultSetType and resultSetConcurrency has changed in this version.

        HSQLDB supports TYPE_FORWARD_ONLY, TYPE_SCROLL_INSENSITIVE, CONCUR_READ_ONLY, CONCUR_UPDATABLE results.

        If an unsupported combination is requested, a SQLWarning is issued on this Connection and the closest supported combination is used instead.

        Specified by:
        createStatement in interface java.sql.Connection
        Parameters:
        resultSetType - a result set type; one of ResultSet.TYPE_FORWARD_ONLY, ResultSet.TYPE_SCROLL_INSENSITIVE, or ResultSet.TYPE_SCROLL_SENSITIVE
        resultSetConcurrency - a concurrency type; one of ResultSet.CONCUR_READ_ONLY or ResultSet.CONCUR_UPDATABLE
        Returns:
        a new Statement object that will generate ResultSet objects with the given type and concurrency
        Throws:
        java.sql.SQLException - if a database access error occurs, this (JDBC4 Clarification:) method is called on a closed connection (:JDBC4 Clarification) or the given parameters are not ResultSet constants indicating type and concurrency
        java.sql.SQLFeatureNotSupportedException - if the JDBC driver does not support this method or this method is not supported for the specified result set type and result set concurrency.
        Since:
        JDK 1.2
      • prepareStatement

        public java.sql.PreparedStatement prepareStatement​(java.lang.String sql,
                                                           int resultSetType,
                                                           int resultSetConcurrency)
                                                    throws java.sql.SQLException
        Creates a PreparedStatement object that will generate ResultSet objects with the given type and concurrency. This method is the same as the prepareStatement method above, but it allows the default result set type and concurrency to be overridden. (JDBC4 Clarification:) The holdability of the created result sets can be determined by calling getHoldability().

        HSQLDB-Specific Information:

        HSQLDB 2.0 adheres closely to SQL and JDBC standards. The interpretation of of resultSetType and resultSetConcurrency has changed in this version.

        HSQLDB supports TYPE_FORWARD_ONLY, TYPE_SCROLL_INSENSITIVE, CONCUR_READ_ONLY, CONCUR_UPDATABLE results.

        If an unsupported combination is requested, a SQLWarning is issued on this Connection and the closest supported combination is used instead.

        Specified by:
        prepareStatement in interface java.sql.Connection
        Parameters:
        sql - a String object that is the SQL statement to be sent to the database; may contain one or more '?' IN parameters
        resultSetType - a result set type; one of ResultSet.TYPE_FORWARD_ONLY, ResultSet.TYPE_SCROLL_INSENSITIVE, or ResultSet.TYPE_SCROLL_SENSITIVE
        resultSetConcurrency - a concurrency type; one of ResultSet.CONCUR_READ_ONLY or ResultSet.CONCUR_UPDATABLE
        Returns:
        a new PreparedStatement object containing the pre-compiled SQL statement that will produce ResultSet objects with the given type and concurrency
        Throws:
        java.sql.SQLException - if a database access error occurs, this (JDBC4 Clarification:) method is called on a closed connection (:JDBC4 Clarification) or the given parameters are not ResultSet constants indicating type and concurrency
        java.sql.SQLFeatureNotSupportedException - if the JDBC driver does not support this method or this method is not supported for the specified result set type and result set concurrency.
        Since:
        JDK 1.2
      • prepareCall

        public java.sql.CallableStatement prepareCall​(java.lang.String sql,
                                                      int resultSetType,
                                                      int resultSetConcurrency)
                                               throws java.sql.SQLException
        Creates a CallableStatement object that will generate ResultSet objects with the given type and concurrency. This method is the same as the prepareCall method above, but it allows the default result set type and concurrency to be overridden. (JDBC4 Clarification:) The holdability of the created result sets can be determined by calling getHoldability().

        HSQLDB-Specific Information:

        HSQLDB 2.0 adheres closely to SQL and JDBC standards. The interpretation of of resultSetType and resultSetConcurrency has changed in this version.

        HSQLDB supports TYPE_FORWARD_ONLY, TYPE_SCROLL_INSENSITIVE, CONCUR_READ_ONLY, CONCUR_UPDATABLE results.

        If an unsupported combination is requested, a SQLWarning is issued on this Connection and the closest supported combination is used instead.

        Specified by:
        prepareCall in interface java.sql.Connection
        Parameters:
        sql - a String object that is the SQL statement to be sent to the database; may contain on or more '?' parameters
        resultSetType - a result set type; one of ResultSet.TYPE_FORWARD_ONLY, ResultSet.TYPE_SCROLL_INSENSITIVE, or ResultSet.TYPE_SCROLL_SENSITIVE
        resultSetConcurrency - a concurrency type; one of ResultSet.CONCUR_READ_ONLY or ResultSet.CONCUR_UPDATABLE
        Returns:
        a new CallableStatement object containing the pre-compiled SQL statement that will produce ResultSet objects with the given type and concurrency
        Throws:
        java.sql.SQLException - if a database access error occurs, this method (JDBC4 Clarification:) is called on a closed connection (:JDBC4 Clarification) or the given parameters are not ResultSet constants indicating type and concurrency
        java.sql.SQLFeatureNotSupportedException - if the JDBC driver does not support this method or this method is not supported for the specified result set type and result set concurrency.
        Since:
        JDK 1.2
      • getTypeMap

        public java.util.Map<java.lang.String,​java.lang.Class<?>> getTypeMap()
                                                                            throws java.sql.SQLException
        Retrieves the Map object associated with this Connection object. Unless the application has added an entry, the type map returned will be empty. JDBC 4.1[

        You must invoke setTypeMap after making changes to the Map object returned from getTypeMap as a JDBC driver may create an internal copy of the Map object passed to setTypeMap:

              Map<String,Class<?>> myMap = con.getTypeMap();
              myMap.put("mySchemaName.ATHLETES", Athletes.class);
              con.setTypeMap(myMap);
         
        ]

        HSQLDB-Specific Information:

        For compatibility, HSQLDB returns an empty map.

        Specified by:
        getTypeMap in interface java.sql.Connection
        Returns:
        the java.util.Map object associated with this Connection object
        Throws:
        java.sql.SQLException - if a database access error occurs (JDBC4 Clarification:) or this method is called on a closed connection
        java.sql.SQLFeatureNotSupportedException - if the JDBC driver does not support this method
        Since:
        JDK 1.2
        See Also:
        setTypeMap(java.util.Map<java.lang.String, java.lang.Class<?>>)
      • setTypeMap

        public void setTypeMap​(java.util.Map<java.lang.String,​java.lang.Class<?>> map)
                        throws java.sql.SQLException
        Installs the given TypeMap object as the type map for this Connection object. The type map will be used for the custom mapping of SQL structured types and distinct types. JDBC4.1[

        You must set the values for the TypeMap prior to calling setMap as a JDBC driver may create an internal copy of the TypeMap:

              Map myMap<String,Class<?>> = new HashMap<String,Class<?>>();
              myMap.put("mySchemaName.ATHLETES", Athletes.class);
              con.setTypeMap(myMap);
         
        ]

        HSQLDB-Specific Information:

        HSQLDB does not yet support this feature. Calling this method always throws a SQLException, stating that the function is not supported.

        Specified by:
        setTypeMap in interface java.sql.Connection
        Parameters:
        map - the java.util.Map object to install as the replacement for this Connection object's default type map
        Throws:
        java.sql.SQLException - if a database access error occurs, this (JDBC4 Clarification:) method is called on a closed connection or (:JDBC4 Clarification) the given parameter is not a java.util.Map object
        java.sql.SQLFeatureNotSupportedException - if the JDBC driver does not support this method
        Since:
        JDK 1.2
        See Also:
        getTypeMap()
      • setHoldability

        public void setHoldability​(int holdability)
                            throws java.sql.SQLException
        (JDBC4 Clarification:) Changes the default holdability of ResultSet objects created using this Connection object to the given holdability. The default holdability of ResultSet objects can be determined by invoking DatabaseMetaData.getResultSetHoldability().

        HSQLDB-Specific Information:

        HSQLDB supports this feature.

        Specified by:
        setHoldability in interface java.sql.Connection
        Parameters:
        holdability - a ResultSet holdability constant; one of ResultSet.HOLD_CURSORS_OVER_COMMIT or ResultSet.CLOSE_CURSORS_AT_COMMIT
        Throws:
        java.sql.SQLException - if a database access occurs, this method is called (JDBC4 Clarification:) on a closed connection, or the given parameter (JDBC4 Clarification:) is not a ResultSet constant indicating holdability
        java.sql.SQLFeatureNotSupportedException - if the given holdability is not supported
        Since:
        JDK 1.4, HSQLDB 1.7.2
        See Also:
        getHoldability(), DatabaseMetaData.getResultSetHoldability(), JDBCResultSet
      • getHoldability

        public int getHoldability()
                           throws java.sql.SQLException
        Retrieves the current holdability of ResultSet objects created using this Connection object.

        HSQLDB-Specific Information:

        HSQLDB returns the current holdability.

        The default is HOLD_CURSORS_OVER_COMMIT.

        Specified by:
        getHoldability in interface java.sql.Connection
        Returns:
        the holdability, one of ResultSet.HOLD_CURSORS_OVER_COMMIT or ResultSet.CLOSE_CURSORS_AT_COMMIT
        Throws:
        java.sql.SQLException - if a database access error occurs (JDBC4 Clarification:) or this method is called on a closed connection
        Since:
        JDK 1.4, HSQLDB 1.7.2
        See Also:
        setHoldability(int), DatabaseMetaData.getResultSetHoldability(), JDBCResultSet
      • setSavepoint

        public java.sql.Savepoint setSavepoint()
                                        throws java.sql.SQLException
        Creates an unnamed savepoint in the current transaction and returns the new Savepoint object that represents it.

        (JDBC4 clarification:) if setSavepoint is invoked outside of an active transaction, a transaction will be started at this newly created savepoint.

        HSQLDB-Specific Information:

        From 2.0, HSQLDB supports this feature.

        Note: Unnamed savepoints are not part of the SQL:2003 standard. Use setSavepoint(String name) instead.

        Specified by:
        setSavepoint in interface java.sql.Connection
        Returns:
        the new Savepoint object
        Throws:
        java.sql.SQLException - if a database access error occurs, (JDBC4 Clarification:) this method is called while participating in a distributed transaction, this method is called on a closed connection or this Connection object is currently in auto-commit mode
        java.sql.SQLFeatureNotSupportedException - if the JDBC driver does not support this method
        Since:
        JDK 1.4, HSQLDB 1.7.2
        See Also:
        JDBCSavepoint, Savepoint
      • setSavepoint

        public java.sql.Savepoint setSavepoint​(java.lang.String name)
                                        throws java.sql.SQLException
        Creates a savepoint with the given name in the current transaction and returns the new Savepoint object that represents it.

        if setSavepoint is invoked outside of an active transaction, a transaction will be started at this newly created savepoint.

        HSQLDB-Specific Information:

        Previous to JDBC 4, if the connection is autoCommit, setting a savepoint has no effect, as it is cleared upon the execution of the next transactional statement. When built for JDBC 4, this method throws an SQLException when this Connection object is currently in auto-commit mode, as per the JDBC 4 standard.

        Specified by:
        setSavepoint in interface java.sql.Connection
        Parameters:
        name - a String containing the name of the savepoint
        Returns:
        the new Savepoint object
        Throws:
        java.sql.SQLException - if a database access error occurs, (JDBC4 Clarification:) this method is called while participating in a distributed transaction, this method is called on a closed connection or this Connection object is currently in auto-commit mode
        java.sql.SQLFeatureNotSupportedException - if the JDBC driver does not support this method
        Since:
        JDK 1.4, HSQLDB 1.7.2
        See Also:
        JDBCSavepoint, Savepoint
      • rollback

        public void rollback​(java.sql.Savepoint savepoint)
                      throws java.sql.SQLException
        Undoes all changes made after the given Savepoint object was set.

        This method should be used only when auto-commit has been disabled.

        HSQLDB-Specific Information:

        Previous to JDBC 4, JDBCSavepoint objects are valid for the life of the originating Connection object and hence can be used interchangeably, as long as they have equal savepoint names.

        When built for JDBC 4, JDBCConnection objects invalidate JDBCSavepoint objects when auto-commit mode is entered as well as when they are used to successfully release or roll back to a named SQL savepoint. As per the JDBC 4 standard, when built for JDBC 4, this method throws an SQLException when this Connection object is currently in auto-commit mode and an invalidated JDBCSavepoint is specified.

        Specified by:
        rollback in interface java.sql.Connection
        Parameters:
        savepoint - the Savepoint object to roll back to
        Throws:
        java.sql.SQLException - if a database access error occurs, this method is called while participating in a distributed transaction, this method is called on a closed connection, the Savepoint object is no longer valid, or this Connection object is currently in auto-commit mode
        java.sql.SQLFeatureNotSupportedException - if the JDBC driver does not support this method
        Since:
        JDK 1.4, HSQLDB 1.7.2
        See Also:
        JDBCSavepoint, Savepoint, rollback()
      • releaseSavepoint

        public void releaseSavepoint​(java.sql.Savepoint savepoint)
                              throws java.sql.SQLException
        Removes the specified Savepoint (JDBC4 Clarification:) and subsequent Savepoint objects from the current transaction. Any reference to the savepoint after it have been removed will cause an SQLException to be thrown. HSLQDB Note:

        Previous to JDBC 4, JDBCSavepoint objects are valid for the life of the originating Connection object and hence can be used interchangeably, as long as they have equal savepoint names.

        When built for JDBC 4, JDBCConnection objects invalidate JDBCSavepoint objects when auto-commit mode is entered as well as when they are used to successfully release or roll back to a named SQL savepoint. As per the JDBC 4 standard, when built for JDBC 4, this method throws an SQLException when this Connection object is currently in auto-commit mode and when an invalidated JDBCSavepoint is specified.

        Specified by:
        releaseSavepoint in interface java.sql.Connection
        Parameters:
        savepoint - the Savepoint object to be removed
        Throws:
        java.sql.SQLException - if a database access error occurs, this (JDBC4 Clarification:) method is called on a closed connection or the given Savepoint object is not a valid savepoint in the current transaction
        java.sql.SQLFeatureNotSupportedException - if the JDBC driver does not support this method
        Since:
        JDK 1.4, HSQLDB 1.7.2
        See Also:
        JDBCSavepoint, Savepoint
      • createStatement

        public java.sql.Statement createStatement​(int resultSetType,
                                                  int resultSetConcurrency,
                                                  int resultSetHoldability)
                                           throws java.sql.SQLException
        Creates a Statement object that will generate ResultSet objects with the given type, concurrency, and holdability. This method is the same as the createStatement method above, but it allows the default result set type, concurrency, and holdability to be overridden.

        HSQLDB-Specific Information:

        HSQLDB 2.0 adheres closely to SQL and JDBC standards. The interpretation of of resultSetType and resultSetConcurrency has changed in this version.

        HSQLDB supports TYPE_FORWARD_ONLY, TYPE_SCROLL_INSENSITIVE, CONCUR_READ_ONLY, CONCUR_UPDATABLE results.

        If an unsupported combination is requested, a SQLWarning is issued on this Connection and the closest supported combination is used instead.

        Specified by:
        createStatement in interface java.sql.Connection
        Parameters:
        resultSetType - one of the following ResultSet constants: ResultSet.TYPE_FORWARD_ONLY, ResultSet.TYPE_SCROLL_INSENSITIVE, or ResultSet.TYPE_SCROLL_SENSITIVE
        resultSetConcurrency - one of the following ResultSet constants: ResultSet.CONCUR_READ_ONLY or ResultSet.CONCUR_UPDATABLE
        resultSetHoldability - one of the following ResultSet constants: ResultSet.HOLD_CURSORS_OVER_COMMIT or ResultSet.CLOSE_CURSORS_AT_COMMIT
        Returns:
        a new Statement object that will generate ResultSet objects with the given type, concurrency, and holdability
        Throws:
        java.sql.SQLException - if a database access error occurs, this (JDBC4 Clarification:) method is called on a closed connection (:JDBC4 Clarification) or the given parameters are not ResultSet constants indicating type, concurrency, and holdability
        java.sql.SQLFeatureNotSupportedException - if the JDBC driver does not support this method or this method is not supported for the specified result set type, result set holdability and result set concurrency.
        Since:
        JDK 1.4, HSQLDB 1.7.2
        See Also:
        JDBCResultSet
      • prepareStatement

        public java.sql.PreparedStatement prepareStatement​(java.lang.String sql,
                                                           int resultSetType,
                                                           int resultSetConcurrency,
                                                           int resultSetHoldability)
                                                    throws java.sql.SQLException
        Creates a PreparedStatement object that will generate ResultSet objects with the given type, concurrency, and holdability.

        This method is the same as the prepareStatement method above, but it allows the default result set type, concurrency, and holdability to be overridden.

        HSQLDB-Specific Information:

        HSQLDB 2.0 adheres closely to SQL and JDBC standards. The interpretation of of resultSetType and resultSetConcurrency has changed in this version.

        HSQLDB supports TYPE_FORWARD_ONLY, TYPE_SCROLL_INSENSITIVE, CONCUR_READ_ONLY, CONCUR_UPDATABLE results.

        HOLD_CURSORS_OVER_COMMIT is supported only when CONCUR_READ_ONLY is requested.

        If an unsupported combination is requested, a SQLWarning is issued on this Connection and the closest supported combination is used instead.

        Specified by:
        prepareStatement in interface java.sql.Connection
        Parameters:
        sql - a String object that is the SQL statement to be sent to the database; may contain one or more '?' IN parameters
        resultSetType - one of the following ResultSet constants: ResultSet.TYPE_FORWARD_ONLY, ResultSet.TYPE_SCROLL_INSENSITIVE, or ResultSet.TYPE_SCROLL_SENSITIVE
        resultSetConcurrency - one of the following ResultSet constants: ResultSet.CONCUR_READ_ONLY or ResultSet.CONCUR_UPDATABLE
        resultSetHoldability - one of the following ResultSet constants: ResultSet.HOLD_CURSORS_OVER_COMMIT or ResultSet.CLOSE_CURSORS_AT_COMMIT
        Returns:
        a new PreparedStatement object, containing the pre-compiled SQL statement, that will generate ResultSet objects with the given type, concurrency, and holdability
        Throws:
        java.sql.SQLException - if a database access error occurs, this (JDBC4 Clarification:) method is called on a closed connection (:JDBC4 Clarification) or the given parameters are not ResultSet constants indicating type, concurrency, and holdability
        java.sql.SQLFeatureNotSupportedException - if the JDBC driver does not support this method or this method is not supported for the specified result set type, result set holdability and result set concurrency.
        Since:
        JDK 1.4, HSQLDB 1.7.2
        See Also:
        JDBCResultSet
      • prepareCall

        public java.sql.CallableStatement prepareCall​(java.lang.String sql,
                                                      int resultSetType,
                                                      int resultSetConcurrency,
                                                      int resultSetHoldability)
                                               throws java.sql.SQLException
        Creates a CallableStatement object that will generate ResultSet objects with the given type and concurrency. This method is the same as the prepareCall method above, but it allows the default result set type, result set concurrency type and holdability to be overridden.

        HSQLDB-Specific Information:

        HSQLDB 2.0 adheres closely to SQL and JDBC standards. The interpretation of of resultSetType and resultSetConcurrency has changed in this version.

        HSQLDB supports TYPE_FORWARD_ONLY, TYPE_SCROLL_INSENSITIVE, CONCUR_READ_ONLY, CONCUR_UPDATABLE results.

        If an unsupported combination is requested, a SQLWarning is issued on this Connection and the closest supported combination is used instead.

        Specified by:
        prepareCall in interface java.sql.Connection
        Parameters:
        sql - a String object that is the SQL statement to be sent to the database; may contain on or more '?' parameters
        resultSetType - one of the following ResultSet constants: ResultSet.TYPE_FORWARD_ONLY, ResultSet.TYPE_SCROLL_INSENSITIVE, or ResultSet.TYPE_SCROLL_SENSITIVE
        resultSetConcurrency - one of the following ResultSet constants: ResultSet.CONCUR_READ_ONLY or ResultSet.CONCUR_UPDATABLE
        resultSetHoldability - one of the following ResultSet constants: ResultSet.HOLD_CURSORS_OVER_COMMIT or ResultSet.CLOSE_CURSORS_AT_COMMIT
        Returns:
        a new CallableStatement object, containing the pre-compiled SQL statement, that will generate ResultSet objects with the given type, concurrency, and holdability
        Throws:
        java.sql.SQLException - if a database access error occurs, this (JDBC4 Clarification:) method is called on a closed connection (:JDBC4 Clarification) or the given parameters are not ResultSet constants indicating type, concurrency, and holdability
        java.sql.SQLFeatureNotSupportedException - if the JDBC driver does not support this method or this method is not supported for the specified result set type, result set holdability and result set concurrency.
        Since:
        JDK 1.4, HSQLDB 1.7.2
        See Also:
        JDBCResultSet
      • prepareStatement

        public java.sql.PreparedStatement prepareStatement​(java.lang.String sql,
                                                           int autoGeneratedKeys)
                                                    throws java.sql.SQLException
        Creates a default PreparedStatement object that has the capability to retrieve auto-generated keys. The given constant tells the driver whether it should make auto-generated keys available for retrieval. This parameter is ignored if the SQL statement is not an INSERT statement, or an SQL statement able to return auto-generated keys (the list of such statements is vendor-specific).

        Note: This method is optimized for handling parametric SQL statements that benefit from pre-compilation. If the driver supports pre-compilation, the method prepareStatement will send the statement to the database for pre-compilation. Some drivers may not support pre-compilation. In this case, the statement may not be sent to the database until the PreparedStatement object is executed. This has no direct effect on users; however, it does affect which methods throw certain SQLExceptions.

        Result sets created using the returned PreparedStatement object will by default be type TYPE_FORWARD_ONLY and have a concurrency level of CONCUR_READ_ONLY. (JDBC4 Clarification:) The holdability of the created result sets can be determined by calling getHoldability().

        HSQLDB-Specific Information:

        Starting with version 2.0, HSQLDB supports returning generated columns with single-row and multi-row INSERT, UPDATE and MERGE statements.

        If the table has an IDENTITY or GENERATED column(s) the values for these columns are returned in the next call to getGeneratedKeys() after each execution of the PreparedStatement.

        HSQLDB also supports returning primary key values from he rows by using the org.hsqldb.jdbc.JDBCStatement.RETURN_PRIMARY_KEYS constant.

        Specified by:
        prepareStatement in interface java.sql.Connection
        Parameters:
        sql - an SQL statement that may contain one or more '?' IN parameter placeholders
        autoGeneratedKeys - a flag indicating whether auto-generated keys should be returned; one of Statement.RETURN_GENERATED_KEYS or Statement.NO_GENERATED_KEYS
        Returns:
        a new PreparedStatement object, containing the pre-compiled SQL statement, that will have the capability of returning auto-generated keys
        Throws:
        java.sql.SQLException - if a database access error occurs, this (JDBC4 Clarification:) method is called on a closed connection (:JDBC4 Clarification) or the given parameter is not a Statement constant indicating whether auto-generated keys should be returned
        java.sql.SQLFeatureNotSupportedException - if the JDBC driver does not support this method with a constant of Statement.RETURN_GENERATED_KEYS
        Since:
        JDK 1.4, HSQLDB 1.7.2
      • prepareStatement

        public java.sql.PreparedStatement prepareStatement​(java.lang.String sql,
                                                           int[] columnIndexes)
                                                    throws java.sql.SQLException
        Creates a default PreparedStatement object capable of returning the auto-generated keys designated by the given array. This array contains the indexes of the columns in the target table that contain the auto-generated keys that should be made available. The driver will ignore the array if the SQL statement is not an INSERT statement, or an SQL statement able to return auto-generated keys (the list of such statements is vendor-specific).

        An SQL statement with or without IN parameters can be pre-compiled and stored in a PreparedStatement object. This object can then be used to efficiently execute this statement multiple times.

        Note: This method is optimized for handling parametric SQL statements that benefit from pre-compilation. If the driver supports pre-compilation, the method prepareStatement will send the statement to the database for pre-compilation. Some drivers may not support pre-compilation. In this case, the statement may not be sent to the database until the PreparedStatement object is executed. This has no direct effect on users; however, it does affect which methods throw certain SQLExceptions.

        Result sets created using the returned PreparedStatement object will by default be type TYPE_FORWARD_ONLY and have a concurrency level of CONCUR_READ_ONLY. (JDBC4 Clarification:) The holdability of the created result sets can be determined by calling getHoldability().

        HSQLDB-Specific Information:

        Starting with version 2.0, HSQLDB supports returning generated columns with single-row and multi-row INSERT, UPDATE and MERGE statements.

        The columnIndexes may specify any set of columns of the table.

        Specified by:
        prepareStatement in interface java.sql.Connection
        Parameters:
        sql - an SQL statement that may contain one or more '?' IN parameter placeholders
        columnIndexes - an array of column indexes indicating the columns that should be returned from the inserted row or rows
        Returns:
        a new PreparedStatement object, containing the pre-compiled statement, that is capable of returning the auto-generated keys designated by the given array of column indexes
        Throws:
        java.sql.SQLException - if a database access error occurs (JDBC4 Clarification:) or this method is called on a closed connection
        java.sql.SQLFeatureNotSupportedException - if the JDBC driver does not support this method
        Since:
        JDK 1.4, HSQLDB 1.7.2
      • prepareStatement

        public java.sql.PreparedStatement prepareStatement​(java.lang.String sql,
                                                           java.lang.String[] columnNames)
                                                    throws java.sql.SQLException
        Creates a default PreparedStatement object capable of returning the auto-generated keys designated by the given array. This array contains the names of the columns in the target table that contain the auto-generated keys that should be returned. The driver will ignore the array if the SQL statement is not an INSERT statement, or an SQL statement able to return auto-generated keys (the list of such statements is vendor-specific).

        An SQL statement with or without IN parameters can be pre-compiled and stored in a PreparedStatement object. This object can then be used to efficiently execute this statement multiple times.

        Note: This method is optimized for handling parametric SQL statements that benefit from pre-compilation. If the driver supports pre-compilation, the method prepareStatement will send the statement to the database for pre-compilation. Some drivers may not support pre-compilation. In this case, the statement may not be sent to the database until the PreparedStatement object is executed. This has no direct effect on users; however, it does affect which methods throw certain SQLExceptions.

        Result sets created using the returned PreparedStatement object will by default be type TYPE_FORWARD_ONLY and have a concurrency level of CONCUR_READ_ONLY. (JDBC4 Clarification:) The holdability of the created result sets can be determined by calling getHoldability().

        HSQLDB-Specific Information:

        Starting with version 2.0, HSQLDB supports returning generated columns with single-row and multi-row INSERT, UPDATE and MERGE statements.

        The columnNames may specify any set of columns of the table. The names are case-sensitive, unlike column names in ResultSet methods.

        Specified by:
        prepareStatement in interface java.sql.Connection
        Parameters:
        sql - an SQL statement that may contain one or more '?' IN parameter placeholders
        columnNames - an array of column names indicating the columns that should be returned from the inserted row or rows
        Returns:
        a new PreparedStatement object, containing the pre-compiled statement, that is capable of returning the auto-generated keys designated by the given array of column names
        Throws:
        java.sql.SQLException - if a database access error occurs (JDBC4 Clarification:) or this method is called on a closed connection
        java.sql.SQLFeatureNotSupportedException - if the JDBC driver does not support this method
        Since:
        JDK 1.4, HSQLDB 1.7.2
      • createClob

        public java.sql.Clob createClob()
                                 throws java.sql.SQLException
        Constructs an object that implements the Clob interface. The object returned initially contains no data. The setAsciiStream, setCharacterStream and setString methods of the Clob interface may be used to add data to the Clob.
        Specified by:
        createClob in interface java.sql.Connection
        Returns:
        An object that implements the Clob interface
        Throws:
        java.sql.SQLException - if an object that implements the Clob interface can not be constructed, this method is called on a closed connection or a database access error occurs.
        java.sql.SQLFeatureNotSupportedException - if the JDBC driver does not support this data type
        Since:
        JDK 1.6, HSQLDB 2.0
      • createBlob

        public java.sql.Blob createBlob()
                                 throws java.sql.SQLException
        Constructs an object that implements the Blob interface. The object returned initially contains no data. The setBinaryStream and setBytes methods of the Blob interface may be used to add data to the Blob.
        Specified by:
        createBlob in interface java.sql.Connection
        Returns:
        An object that implements the Blob interface
        Throws:
        java.sql.SQLException - if an object that implements the Blob interface can not be constructed, this method is called on a closed connection or a database access error occurs.
        java.sql.SQLFeatureNotSupportedException - if the JDBC driver does not support this data type
        Since:
        JDK 1.6, HSQLDB 2.0
      • createNClob

        public java.sql.NClob createNClob()
                                   throws java.sql.SQLException
        Constructs an object that implements the NClob interface. The object returned initially contains no data. The setAsciiStream, setCharacterStream and setString methods of the NClob interface may be used to add data to the NClob.
        Specified by:
        createNClob in interface java.sql.Connection
        Returns:
        An object that implements the NClob interface
        Throws:
        java.sql.SQLException - if an object that implements the NClob interface can not be constructed, this method is called on a closed connection or a database access error occurs.
        java.sql.SQLFeatureNotSupportedException - if the JDBC driver does not support this data type
        Since:
        JDK 1.6, HSQLDB 2.0
      • createSQLXML

        public java.sql.SQLXML createSQLXML()
                                     throws java.sql.SQLException
        Constructs an object that implements the SQLXML interface. The object returned initially contains no data. The createXmlStreamWriter object and setString method of the SQLXML interface may be used to add data to the SQLXML object.
        Specified by:
        createSQLXML in interface java.sql.Connection
        Returns:
        An object that implements the SQLXML interface
        Throws:
        java.sql.SQLException - if an object that implements the SQLXML interface can not be constructed, this method is called on a closed connection or a database access error occurs.
        java.sql.SQLFeatureNotSupportedException - if the JDBC driver does not support this data type
        Since:
        JDK 1.6, HSQLDB 2.0
      • isValid

        public boolean isValid​(int timeout)
                        throws java.sql.SQLException
        Returns true if the connection has not been closed and is still valid. The driver shall submit a query on the connection or use some other mechanism that positively verifies the connection is still valid when this method is called.

        The query submitted by the driver to validate the connection shall be executed in the context of the current transaction.

        HSQLDB-Specific Information:

        HSQLDB uses a maximum timeout of 60 seconds if timeout has been specified as zero.

        Specified by:
        isValid in interface java.sql.Connection
        Parameters:
        timeout - - The time in seconds to wait for the database operation used to validate the connection to complete. If the timeout period expires before the operation completes, this method returns false. A value of 0 indicates a timeout is not applied to the database operation.
        Returns:
        true if the connection is valid, false otherwise
        Throws:
        java.sql.SQLException - if the value supplied for timeout is less than 0
        Since:
        JDK 1.6, HSQLDB 2.0
        See Also:
        JDBCDatabaseMetaData.getClientInfoProperties()
      • setClientInfo

        public void setClientInfo​(java.lang.String name,
                                  java.lang.String value)
                           throws java.sql.SQLClientInfoException
        Sets the value of the client info property specified by name to the value specified by value.

        Applications may use the DatabaseMetaData.getClientInfoProperties method to determine the client info properties supported by the driver and the maximum length that may be specified for each property.

        The driver stores the value specified in a suitable location in the database. For example in a special register, session parameter, or system table column. For efficiency the driver may defer setting the value in the database until the next time a statement is executed or prepared. Other than storing the client information in the appropriate place in the database, these methods shall not alter the behavior of the connection in any way. The values supplied to these methods are used for accounting, diagnostics and debugging purposes only.

        The driver shall generate a warning if the client info name specified is not recognized by the driver.

        If the value specified to this method is greater than the maximum length for the property the driver may either truncate the value and generate a warning or generate a SQLClientInfoException. If the driver generates a SQLClientInfoException, the value specified was not set on the connection.

        The following are standard client info properties. Drivers are not required to support these properties however if the driver supports a client info property that can be described by one of the standard properties, the standard property name should be used.

        • ApplicationName - The name of the application currently utilizing the connection
        • ClientUser - The name of the user that the application using the connection is performing work for. This may not be the same as the user name that was used in establishing the connection.
        • ClientHostname - The host name of the computer the application using the connection is running on.

        HSQLDB-Specific Information:

        HSQLDB 2.0, throws an SQLClientInfoException when this method is called.

        Specified by:
        setClientInfo in interface java.sql.Connection
        Parameters:
        name - The name of the client info property to set
        value - The value to set the client info property to. If the value is null, the current value of the specified property is cleared.

        Throws:
        java.sql.SQLClientInfoException - if the database server returns an error while setting the client info value on the database server or this method is called on a closed connection

        Since:
        JDK 1.6, HSQLDB 2.0
      • setClientInfo

        public void setClientInfo​(java.util.Properties properties)
                           throws java.sql.SQLClientInfoException
        Sets the value of the connection's client info properties. The Properties object contains the names and values of the client info properties to be set. The set of client info properties contained in the properties list replaces the current set of client info properties on the connection. If a property that is currently set on the connection is not present in the properties list, that property is cleared. Specifying an empty properties list will clear all of the properties on the connection. See setClientInfo (String, String) for more information.

        If an error occurs in setting any of the client info properties, a SQLClientInfoException is thrown. The SQLClientInfoException contains information indicating which client info properties were not set. The state of the client information is unknown because some databases do not allow multiple client info properties to be set atomically. For those databases, one or more properties may have been set before the error occurred.

        Specified by:
        setClientInfo in interface java.sql.Connection
        Parameters:
        properties - the list of client info properties to set

        Throws:
        java.sql.SQLClientInfoException - if the database server returns an error while setting the clientInfo values on the database server or this method is called on a closed connection
        Since:
        JDK 1.6, HSQLDB 2.0

        See Also:
        setClientInfo(String, String)
      • getClientInfo

        public java.lang.String getClientInfo​(java.lang.String name)
                                       throws java.sql.SQLException
        Returns the value of the client info property specified by name. This method may return null if the specified client info property has not been set and does not have a default value. This method will also return null if the specified client info property name is not supported by the driver.

        Applications may use the DatabaseMetaData.getClientInfoProperties method to determine the client info properties supported by the driver.

        Specified by:
        getClientInfo in interface java.sql.Connection
        Parameters:
        name - The name of the client info property to retrieve

        Returns:
        The value of the client info property specified

        Throws:
        java.sql.SQLException - if the database server returns an error when fetching the client info value from the database or this method is called on a closed connection

        Since:
        JDK 1.6, HSQLDB 2.0
        See Also:
        DatabaseMetaData.getClientInfoProperties()
      • getClientInfo

        public java.util.Properties getClientInfo()
                                           throws java.sql.SQLException
        Returns a list containing the name and current value of each client info property supported by the driver. The value of a client info property may be null if the property has not been set and does not have a default value.

        Specified by:
        getClientInfo in interface java.sql.Connection
        Returns:
        A Properties object that contains the name and current value of each of the client info properties supported by the driver.

        Throws:
        java.sql.SQLException - if the database server returns an error when fetching the client info values from the database or this method is called on a closed connection

        Since:
        JDK 1.6, HSQLDB 2.0
      • createArrayOf

        public java.sql.Array createArrayOf​(java.lang.String typeName,
                                            java.lang.Object[] elements)
                                     throws java.sql.SQLException
        Factory method for creating Array objects.

        Note: When createArrayOf is used to create an array object that maps to a primitive data type, then it is implementation-defined whether the Array object is an array of that primitive data type or an array of Object.

        Note: The JDBC driver is responsible for mapping the elements Object array to the default JDBC SQL type defined in java.sql.Types for the given class of Object. The default mapping is specified in Appendix B of the JDBC specification. If the resulting JDBC type is not the appropriate type for the given typeName then it is implementation defined whether an SQLException is thrown or the driver supports the resulting conversion.

        Specified by:
        createArrayOf in interface java.sql.Connection
        Parameters:
        typeName - the SQL name of the type the elements of the array map to. The typeName is a database-specific name which may be the name of a built-in type, a user-defined type or a standard SQL type supported by this database. This is the value returned by Array.getBaseTypeName
        elements - the elements that populate the returned object
        Returns:
        an Array object whose elements map to the specified SQL type
        Throws:
        java.sql.SQLException - if a database error occurs, the JDBC type is not appropriate for the typeName and the conversion is not supported, the typeName is null or this method is called on a closed connection
        java.sql.SQLFeatureNotSupportedException - if the JDBC driver does not support this data type
        Since:
        1.6
      • createStruct

        public java.sql.Struct createStruct​(java.lang.String typeName,
                                            java.lang.Object[] attributes)
                                     throws java.sql.SQLException
        Factory method for creating Struct objects.
        Specified by:
        createStruct in interface java.sql.Connection
        Parameters:
        typeName - the SQL type name of the SQL structured type that this Struct object maps to. The typeName is the name of a user-defined type that has been defined for this database. It is the value returned by Struct.getSQLTypeName.
        attributes - the attributes that populate the returned object
        Returns:
        a Struct object that maps to the given SQL type and is populated with the given attributes
        Throws:
        java.sql.SQLException - if a database error occurs, the typeName is null or this method is called on a closed connection
        java.sql.SQLFeatureNotSupportedException - if the JDBC driver does not support this data type
        Since:
        JDK 1.6_b80, HSQLDB 2.0
      • unwrap

        public <T> T unwrap​(java.lang.Class<T> iface)
                     throws java.sql.SQLException
        Returns an object that implements the given interface to allow access to non-standard methods, or standard methods not exposed by the proxy. If the receiver implements the interface then the result is the receiver or a proxy for the receiver. If the receiver is a wrapper and the wrapped object implements the interface then the result is the wrapped object or a proxy for the wrapped object. Otherwise return the result of calling unwrap recursively on the wrapped object or a proxy for that result. If the receiver is not a wrapper and does not implement the interface, then an SQLException is thrown.
        Specified by:
        unwrap in interface java.sql.Wrapper
        Type Parameters:
        T - by which the return type is inferred from input parameter.
        Parameters:
        iface - A Class defining an interface that the result must implement.
        Returns:
        an object that implements the interface. May be a proxy for the actual implementing object.
        Throws:
        java.sql.SQLException - If no object found that implements the interface
        Since:
        JDK 1.6, HSQLDB 2.0
      • isWrapperFor

        public boolean isWrapperFor​(java.lang.Class<?> iface)
                             throws java.sql.SQLException
        Returns true if this either implements the interface argument or is directly or indirectly a wrapper for an object that does. Returns false otherwise. If this implements the interface then return true, else if this is a wrapper then return the result of recursively calling isWrapperFor on the wrapped object. If this does not implement the interface and is not a wrapper, return false. This method should be implemented as a low-cost operation compared to unwrap so that callers can use this method to avoid expensive unwrap calls that may fail. If this method returns true then calling unwrap with the same argument should succeed.
        Specified by:
        isWrapperFor in interface java.sql.Wrapper
        Parameters:
        iface - a Class defining an interface.
        Returns:
        true if this implements the interface or directly or indirectly wraps an object that does.
        Throws:
        java.sql.SQLException - if an error occurs while determining whether this is a wrapper for an object with the given interface.
        Since:
        JDK 1.6, HSQLDB 2.0
      • setSchema

        public void setSchema​(java.lang.String schema)
                       throws java.sql.SQLException
        Sets the given schema name to access.

        If the driver does not support schemas, it will silently ignore this request.

        Calling setSchema has no effect on previously created or prepared Statement objects. It is implementation defined whether a DBMS prepare operation takes place immediately when the Connection method prepareStatement or prepareCall is invoked. For maximum portability, setSchema should be called before a Statement is created or prepared.

        Specified by:
        setSchema in interface java.sql.Connection
        Parameters:
        schema - the name of a schema in which to work
        Throws:
        java.sql.SQLException - if a database access error occurs or this method is called on a closed connection
        Since:
        JDK 1.7, HSQLDB 2.0.1
        See Also:
        getSchema()
      • getSchema

        public java.lang.String getSchema()
                                   throws java.sql.SQLException
        Retrieves this Connection object's current schema name.
        Specified by:
        getSchema in interface java.sql.Connection
        Returns:
        the current schema name or null if there is none
        Throws:
        java.sql.SQLException - if a database access error occurs or this method is called on a closed connection
        Since:
        JDK 1.7 M11 2010/09/10 (b123), HSQLDB 2.0.1
        See Also:
        setSchema(java.lang.String)
      • abort

        public void abort​(java.util.concurrent.Executor executor)
                   throws java.sql.SQLException
        Terminates an open connection. Calling abort results in:
        • The connection marked as closed
        • Closes any physical connection to the database
        • Releases resources used by the connection
        • Insures that any thread that is currently accessing the connection will either progress to completion or throw an SQLException.

        Calling abort marks the connection closed and releases any resources. Calling abort on a closed connection is a no-op.

        It is possible that the aborting and releasing of the resources that are held by the connection can take an extended period of time. When the abort method returns, the connection will have been marked as closed and the Executor that was passed as a parameter to abort may still be executing tasks to release resources.

        This method checks to see that there is an SQLPermission object before allowing the method to proceed. If a SecurityManager exists and its checkPermission method denies calling abort, this method throws a java.lang.SecurityException.

        Specified by:
        abort in interface java.sql.Connection
        Parameters:
        executor - The Executor implementation which will be used by abort.
        Throws:
        java.sql.SQLException - if a database access error occurs or the executor is null,
        java.lang.SecurityException - if a security manager exists and its checkPermission method denies calling abort
        Since:
        JDK 1.7, HSQLDB 2.0.1
        See Also:
        SecurityManager.checkPermission(java.security.Permission), Executor
      • setNetworkTimeout

        public void setNetworkTimeout​(java.util.concurrent.Executor executor,
                                      int milliseconds)
                               throws java.sql.SQLException
        Sets the maximum period a Connection or objects created from the Connection will wait for the database to reply to any one request. If any request remains unanswered, the waiting method will return with a SQLException, and the Connection or objects created from the Connection will be marked as closed. Any subsequent use of the objects, with the exception of the close, isClosed or Connection.isValid methods, will result in a SQLException.

        Note: This method is intended to address a rare but serious condition where network partitions can cause threads issuing JDBC calls to hang uninterruptedly in socket reads, until the OS TCP-TIMEOUT (typically 10 minutes). This method is related to the abort() method which provides an administrator thread a means to free any such threads in cases where the JDBC connection is accessible to the administrator thread. The setNetworkTimeout method will cover cases where there is no administrator thread, or it has no access to the connection. This method is severe in its effects, and should be given a high enough value so it is never triggered before any more normal timeouts, such as transaction timeouts.

        JDBC driver implementations may also choose to support the setNetworkTimeout method to impose a limit on database response time, in environments where no network is present.

        Drivers may internally implement some or all of their API calls with multiple internal driver-database transmissions, and it is left to the driver implementation to determine whether the limit will be applied always to the response to the API call, or to any single request made during the API call.

        This method can be invoked more than once, such as to set a limit for an area of JDBC code, and to reset to the default on exit from this area. Invocation of this method has no impact on already outstanding requests.

        The Statement.setQueryTimeout() timeout value is independent of the timeout value specified in setNetworkTimeout. If the query timeout expires before the network timeout then the statement execution will be canceled. If the network is still active the result will be that both the statement and connection are still usable. However if the network timeout expires before the query timeout or if the statement timeout fails due to network problems, the connection will be marked as closed, any resources held by the connection will be released and both the connection and statement will be unusable.

        When the driver determines that the setNetworkTimeout timeout value has expired, the JDBC driver marks the connection closed and releases any resources held by the connection.

        This method checks to see that there is an SQLPermission object before allowing the method to proceed. If a SecurityManager exists and its checkPermission method denies calling setNetworkTimeout, this method throws a java.lang.SecurityException.

        Specified by:
        setNetworkTimeout in interface java.sql.Connection
        Parameters:
        executor - The Executor implementation which will be used by setNetworkTimeout.
        milliseconds - The time in milliseconds to wait for the database operation to complete. If the JDBC driver does not support milliseconds, the JDBC driver will round the value up to the nearest second. If the timeout period expires before the operation completes, a SQLException will be thrown. A value of 0 indicates that there is no timeout for database operations.
        Throws:
        java.sql.SQLException - if a database access error occurs, this method is called on a closed connection, the executor is null, or the value specified for seconds is less than 0.
        java.lang.SecurityException - if a security manager exists and its checkPermission method denies calling setNetworkTimeout.
        java.sql.SQLFeatureNotSupportedException - if the JDBC driver does not support this method
        Since:
        JDK 1.7 M11 2010/09/10 (b123), HSQLDB 2.0.1
        See Also:
        SecurityManager.checkPermission(java.security.Permission), Statement.setQueryTimeout(int), getNetworkTimeout(), abort(java.util.concurrent.Executor), Executor
      • getNetworkTimeout

        public int getNetworkTimeout()
                              throws java.sql.SQLException
        Retrieves the number of milliseconds the driver will wait for a database request to complete. If the limit is exceeded, a SQLException is thrown.
        Specified by:
        getNetworkTimeout in interface java.sql.Connection
        Returns:
        the current timeout limit in milliseconds; zero means there is no limit
        Throws:
        java.sql.SQLException - if a database access error occurs or this method is called on a closed Connection
        java.sql.SQLFeatureNotSupportedException - if the JDBC driver does not support this method
        Since:
        JDK 1.7 M11 2010/09/10 (b123), HSQLDB 2.0.1
        See Also:
        setNetworkTimeout(java.util.concurrent.Executor, int)
      • getURL

        public java.lang.String getURL()
                                throws java.sql.SQLException
        Retrieves this connection's JDBC url. This method is in support of the JDBCDatabaseMetaData.getURL() method.
        Returns:
        the database connection url with which this object was constructed
        Throws:
        java.sql.SQLException - if this connection is closed
      • reset

        public void reset()
                   throws java.sql.SQLException
        Resets this connection so it can be used again. Used when connections are returned to a connection pool.
        Throws:
        java.sql.SQLException - if a database access error occurs
      • closeFully

        public void closeFully()
        Completely closes a pooled connection
      • getSession

        public org.hsqldb.SessionInterface getSession()
        provides cross-package access to the proprietary (i.e. non-JDBC) HSQLDB session interface.

        Returns:
        the underlying sessionProxy for this connection
      • isInternal

        public boolean isInternal()
      • isNetwork

        public boolean isNetwork()
      • getConnProperties

        public org.hsqldb.persist.HsqlProperties getConnProperties()